Factory For Polypropylene Processing Guide Injection Molding - BIO PLA RESIN-REVO DE101 FOR FILM – Chemdo
Factory For Polypropylene Processing Guide Injection Molding - BIO PLA RESIN-REVO DE101 FOR FILM – Chemdo Detail:
Product Parameters
Product: Poly Lactic Acid
Chemical Formula: (C4H6O3)x
Cas No: 31852-84-3
Print Date: May 10th, 2020
Description
Poly lactic acid resin, made from corn and other plants rich in starch rather than oil, is a low-carbon functional material with superior processing properties.
Product Packaging & Applications
In 25kg kraft bag
Poly lactic acid resin can be used for most synthetic plastics and is suitable for extrusion, injection molding, blow molding, spinning and other molding processes.
|
ITEMS |
UNIT |
METHOD |
REVO |
REVO |
REVO |
REVOD |
|
|
Density |
g/cm³ |
GB/T1033.1-2008 |
1.2-1.3 |
1.2-1.3 |
1.2-1.3 |
1.2-1.3 |
|
|
MVR 190℃,2KG |
g/10 min |
GB/T 3682.1-2018 |
2-10 |
3-12 |
2-12 |
12-40 |
|
|
Melting Points |
℃ |
GB/T19466.3-2004 |
140-155 |
155-170 |
170-180 |
170-180 |
|
|
Glasstransition temperature |
℃ |
GB/T19466.2-2004 |
56-60 |
56-60 |
56-60 |
56-60 |
|
|
Tensile Strengh |
Mpa |
GB/T1040.1-2018 |
≥50 |
≥50 |
≥50 |
≥50 |
|
|
Elongation At Break |
% |
GB/T1040.1-2018 |
≥3.0 |
≥3.0 |
≥3.0 |
≥3.0 |
|
|
Notch impact strength |
KJ/m2 |
GB/T1040.1-2018 |
≥1-3 |
≥2.0 |
≥2.0 |
≥2.0 |
|
Product Details
Polylactic acid (PLA) is a new biodegradable material, which is made of starch raw materials proposed by renewable plant resources (such as corn). Glucose is obtained from starch raw material through saccharification, and then high-purity lactic acid is produced by fermentation of glucose and certain bacteria, and then polylactic acid with certain molecular weight is synthesized by chemical synthesis method.
It has good biodegradability. After use, it can be completely degraded by microorganisms in nature, and finally produce carbon dioxide and water, which does not pollute the environment, which is very beneficial to environmental protection. It is recognized as an environment-friendly material.
The treatment method of ordinary plastics is still incineration and cremation, resulting in a large number of greenhouse gases discharged into the air, while polylactic acid plastics are buried in the soil for degradation, and the generated carbon dioxide directly enters the soil organic matter or is absorbed by plants, which will not be discharged into the air and will not cause the greenhouse effect.
REVODE101 Can Be Applied To
Film blowing and coating products: Blown film modified blend base material is commonly used in starch modified blown film products, which need to improve transparency and heat sealing performance.
REVODE ® Product
Comply with the chemical substance control regulations of China, the United States, the European Union (REACH), Japan and other countries and regions.
Product detail pictures:
Related Product Guide:
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Factory For Polypropylene Processing Guide Injection Molding - BIO PLA RESIN-REVO DE101 FOR FILM – Chemdo , The product will supply to all over the world, such as: New Delhi, Madrid, moldova, Due to good quality and reasonable prices, our products have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
By Evelyn from Mauritius - 2017.05.02 18:28
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Madeline from Barcelona - 2018.11.22 12:28