• head_banner_01

HDPE FI0750

Short Description:

SABIC Brand

HDPE| Film

Made In Saudi Arabia


  • Price: 1000-1200 USD/MT
  • Port: Huangpu / Ningbo / Shanghai / Qingdao
  • MOQ: 1*40GP
  • CAS No: 9002-88-4
  • HS Code: 3901200099
  • Paymen: TT/ LC
  • Product Detail

    Description

    SABIC® HDPE FI0750 is a high molecular High Density Polyethylene copolymer grade typically used for blown film applications. SABIC® HDPE FI0750 features are balance between toughness and stiffness, good impact properties with low gel level.

    Typical Applications

    SABIC® HDPE FI0750 is typically used for blown film extrusion. Typical applications are heavy duty bags, grocery sacks, shopping bags, refuse bags, linersfor multi-wall sacks and liners for frozen food meat. The grade can be blended with LLDPE and LDPE and can be used in co-extrusion process.

    Typical Property Values

      PROPERTIES   TYPICAL VALUES    UNITS   TEST METHODS
    POLYMER PROPERTIES Melt Flow Rate (MFR)
      at 190 °C and 21.6 kg      7.5        g/10 min    ISO 1133
      at 190 °C and 5 kg      0.22        g/10 min    ISO 1133
      Density      950         kg/m³    ASTM D1505 
    MECHANICAL PROPERTIES      
      Hardness Shore D      62     ISO 868
     FILM PROPERTIES      
      Tensile Properties (1)      
      stress at break, MD      50         MPa    ISO 527-3
      stress at break, TD      45         MPa    ISO 527-3
      strain at break, MD      400        %    ISO 527-3
      strain at break, TD      450        %    ISO 527-3
      Dart Impact Strength
       F50      240        g    ASTM D1709
      Elmendorf Tear Strength
       MD      250         mN    ISO 6383-2
      TD  THERMAL PROPERTIES      450         mN    ISO 6383-2
      Brittleness Temperature      <-80        °C    ASTM D746
      Vicat Softening Temperature
      at 50 N (VST/B)   75   °C    ISO 306/B

    Storage And Handling

    Polyethylenes resins (in pelletised or powder form) should be stored in such a way that it prevents exposure to direct sunlight and/or heat, as this may lead to quality deterioration. The storage location should also be dry, dust free and the ambient temperature should not exceed 50 °C. Not complying with these precautionary measures can lead to a degradation of the product which can result in colour changes, bad smell and inadequate  product performance. It is also advisable to process polyethylene resins (in pelletised or powder form) within 6 months after delivery, this because also excessiveaging of polyethylene can lead to a deterioration in quality.

    Environment And Recycling

    The environmental aspects of any packaging material do not only imply waste issues but have to be considered in relation with the use of natural resources, the preservations of foodstuffs, etc. SABIC Europe considers polyethylene to be an environmentally efficient packaging material. Its low specific energy consumption and insignificant emissions to air and water designate polyethylene as the ecological alternative in comparison with the traditional
    packaging materials. Recycling of packaging materials is supported by SABIC Europe whenever ecological and social benefits are achieved and where a social infrastructure for selective collecting and sorting of packaging is fostered. Whenever 'thermal' recycling of packaging (i.e. incineration with energy recovery) is carried out, polyethylene -with its fairly simple molecular structure and low amount of additives- is considered to be a trouble-free fuel.

    Processing Conditions

    Processing conditions.
    Melt Temperature: 200 - 225°C.
    Frost Line Height: 6 - 8 times die cross-cut.
    BUR: 3 - 5

    Disclaimer

    Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right.


  • Previous:
  • Next: